Use and Care Guide

ASSEMBLY INSTRUCTIONS
5
FRAME ASSEMBLY
Hardware Used
M8 x 95 mm Bolt
M8 Washer
x 4
x 8
GG
KK
1. Align the two holes at the top of one front leg (B) with
the two holes at one end of the top frame bar (A).
Insert an M8 x 95 mm bolt (GG) through an M8 washer
(KK), through a leg hole and through top frame bar
(A). Align a back leg (C) on the other side of the top
frame bar (A) and continue the bolt through the back
leg (C), through another M8 washer (KK) and into an
M8 nut (II). Do not tighten completely. Repeat this
procedure for the adjacent hole and to attach the other
two legs at the other end of the top frame bar (A).
GG
KK
KK
II
A
B C
1
2. Attach the foot caps (R) to both front legs (B) and
back legs (C).
2
Hardware Used
M6 x 50 mm
Bolt
M6 Washer
x 4
x 8
DD
JJ
3. Align the two holes of a leg crossbar (E) with the holes
on the front leg (B) and back leg (C) at one end of the
frame. From the outside, insert an M6 x 50 mm bolt (DD)
through an M6 washer (JJ), through the leg crossbar (E),
through the front leg (B), through an
M6 washer (JJ) and
into an M6 nut (HH). Do not tighten completel
y. Repeat
this procedure for the other three crossbar-to-Ieg
connections.
3
B C
R
DD
JJ
JJ
HH
C
E
B
Lowes.com/gardentreasures
M8 Nut
x 4
II
M6 Nut
x 4
HH