ITEM #0511265 2-SEAT SLING SWING MODEL #GSS00133B Français Français p. p. 11 XX Español p. p. 21 XX Español ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday – Friday. EB13529 1 Lowes.
PACKAGE CONTENTS O N L P M A H B Q J E C F I D G R PART A B C D E F G H I J K DESCRIPTION Top frame bar Front leg Back leg Back crossbar Leg crossbar Arm Sling seat Sling back Short hanging bar Long hanging bar QUANTITY PART 1 2 2 1 2 2 1 1 2 2 K L Q Magazine bag Canopy side bar Side support canopy crossbar Support canopy crossbar Canopy Knob “S” Hook R Foot Cap M N O P 2 DESCRIPTION QUANTITY Lowes.
HARDWARE CONTENTS (not shown actual size) M5 x 30 mm Bolt Qty. 12 DD CC BB AA EE FF GG HH II M6 Nut Qty. 12 M8 Nut Qty. 4 Open Hex Wrench Qty. 2 M6 x 45 mm M6 x 50 mm Bolt Bolt Qty. 8 Qty. 4 M8 x 45 mm Bolt Qty. 4 M6 x 75 mm Bolt Qty. 4 M8 x 95 mm Bolt Qty. 4 JJ M6 Washer Qty. 28 KK M8 Washer Qty. 12 LL Allen Wrench Qty. 2 MM Plastic Washer Qty. 4 3 Lowes.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble or install the product. WARNING • The swing is heavy. Handle with care. • Two adults may be needed to assemble this product. CAUTION • Recommended maximum sitting weight for the swing is 500 Ibs. • Assemble the swing on a soft, non-abrasive surface, such as carpeting, to avoid damage. PREPARATION Before beginning assembly of product, make sure all parts are present.
ASSEMBLY INSTRUCTIONS FRAME ASSEMBLY 1. Align the two holes at the top of one front leg (B) with the two holes at one end of the top frame bar (A). Insert an M8 x 95 mm bolt (GG) through an M8 washer (KK), through a leg hole and through top frame bar (A). Align a back leg (C) on the other side of the top frame bar (A) and continue the bolt through the back leg (C), through another M8 washer (KK) and into an M8 nut (II). Do not tighten completely.
ASSEMBLY INSTRUCTIONS 4. Align the holes of the back crossbar (D) with the holes in the two back legs (C). For each hole, insert an M6 x 75 mm bolt (EE) through an M6 washer (JJ), through a back leg (C), through the back crossbar (D), through an M6 washer (JJ) and into an M6 nut (HH). Do not tighten completely. 4 EE C JJ HH Hardware Used x4 EE M6 x 75 mm Bolt HH M6 Nut x4 JJ M6 Washer x8 D SEAT ASSEMBLY 5.
ASSEMBLY INSTRUCTIONS HANGER ASSEMBLY 7. Align the hole at one end of a short hanging bar (I) with the sleeve under the front of the arm (F). From the outside, insert an M6 x 45 mm bolt (CC) through an M6 washer (JJ), through the short hanging bar (I), through a plastic washer (MM), through the sleeve under the arm (F), through an M6 washer (JJ) and into an M6 nut (HH). Do not tighten completely. Attach the long hanging bar (J) to the back of the arm (F) using the same procedure.
ASSEMBLY INSTRUCTIONS CANOPY ASSEMBLY 10. Align the holes in the support canopy crossbars(N) with holes in the canopy side bar (L) on both sides. For each hole, insert a M5 x 30 mm bolt (AA) through the canopy side bar (L) and into support canopy crossbars (N). Repeat this procedure for the other support canopy crossbars (N). Insert side support crossbars (M) into the canopy cover (O) bottom edge and align the holes in the bottom of canopy side bar (L).
CARE AND MAINTENANCE Wash with mild soap. Rinse with water and let air dry. ONE-YEAR LIMITED WARRANTY This warranty is extended to the original purchaser and applies to defects in materials and workmanship of your patio furniture provided your furniture is maintained with care and used only for personal, residential purposes. Frames are warranted to be free from defects in material or workmanship for a period of one (1) year.
REPLACEMENT PARTS LIST PART AA BB CC DD EE FF GG HH II JJ KK LL MM DESCRIPTION M5 x 30mm Bolt Open Hex Wrench M6 x 45mm Bolt M6 x 50mm Bolt M6 x 75mm Bolt M8 x 45mm Bolt M8 x 95mm Bolt M6 Nut M8 Nut M6 Washer M8 Washer Allen Wrench Plastic Washer AA PART# 0511265AA 0511265BB 0511265CC 0511265DD 0511265EE 0511265FF 0511265GG 0511265HH 0511265II 0511265JJ 0511265KK 0511265LL 0511265MM BB CC DD EE FF GG HH II JJ KK LL MM Printed in China Garden Treasures® is a registered trademark of LF, LLC.
