Use and Care Guide

Lowes.com/gardentreasures

ASSEMBLY INSTRUCTIONS

8. Hang the entire seat assembly by the double hooks

through the hanging rings at the top frame bar (A).

9. Lift the canopy (H) on the top frame bar (A). Insert

a knob (PP) through the canopy (H) and secure into

the top frame bar (A). Do not tighten completely.

Repeat procedure for the other side. Securely

tighten the two knobs.

7. Place a long hanging bar (F) and a short hanging bar

(G) on each double “S” hook (OO). Attach the short

hanging bar (G) to the front of the seat assembly by

inserting an M6 x 60 L bolt (BB) through an

M6 washer (HH), through the short hanging bar (G),

through a small plastic washer (LL), through the hole

of the arm (D), through an M6 washer (HH) and

secure with an M6 nut (JJ). Do not tighten completely.

Repeat procedure for the other short hanging bar (G)

and two long hanging bars (F). Now go back and

tighten all bolts and nuts.

Hardware Used

Knob x 2

JJPP

M6 x 60 L Bolt

M6 Washer

M6 Nut

Small Plastic Washer

Double “S” Hook

x 4

x 8

x 4

x 2

LL BB