User Guide

ManualsBrandsGarador ManualsAppGARADOR Smart Phone Control Kit and App

Table Of Contents

GARADOR.CO.NZ

STYLISH SMART AND SECURE SINCE 1962

0800 GARADOR (427 236)

Quick Setup Guide

Garador Smart Garage Access

Smart Phone

Control Kit

And App

The Smart Phone Control Kit works via your home’s WiFi network. Initial set up

involves linking your phone app, smart hub and device (e.g. garage door opener)

to your home network so that you can reliably operate your door from the app.

This user guide will show you the steps required to get you started.

1. Have your garage door opener or device

operational & know your WiFi password.

2. Place Smart Hub within range of

your home WiFi router.

3. Connect Smart Hub to power.

4. Download the Garador App.

(Scan one of the QR codes below.)

5. Click on “Get Started” & follow the steps.

Before You Start:

Scan QR code to

download the

Garador App

for iOS devices.

garador.co.nz/ios/ garador.co.nz/android/

Scan QR code to

download the

Garador App

for android devices.

Download the App:

Summary of content (6 pages)

PAGE 1
Smart Phone Control Kit And App Quick Setup Guide Garador Smart Garage Access The Smart Phone Control Kit works via your home’s WiFi network. Initial set up involves linking your phone app, smart hub and device (e.g. garage door opener) to your home network so that you can reliably operate your door from the app. This user guide will show you the steps required to get you started. Before You Start: 1. Have your garage door opener or device operational & know your WiFi password. 2.
PAGE 2
Smart Hub Setup Guide Smart Phone App Page 1 Click on “Get Started” Enable Hotspot – hold down the Hub button for 5 seconds, release when the LEDs ﬂash, wait for the button to have a solid purple light. Click on “Next” Click on “Setup a new Smart Hub/Opener” Click on “Allow Access to Location” Click on “Smart Hub” then “Next” Click on “Next” 0800 GARADOR (427 236) GARADOR.CO.
PAGE 3
Smart Hub Setup Guide Smart Phone App Page 2 The hub will now connect to your phone app - press join The button on the hub will now ﬂash – press it to continue Setup the details on your device Click on “Next” Complete your details You are now connected Enter your WiFi network details 0800 GARADOR (427 236) GARADOR.CO.
PAGE 4
Smart Hub Setup Guide Smart Phone App Page 3 Select your WiFi network – this needs to be a 2.4Ghz network Enter your WiFi password and press ‘next’ Note: If your home has multiple WiFi networks and your phone reconnects to a different network to your hub you may see the above message Searching for updates to the WiFi ﬁrmware, please wait The app will now connect to your WiFi – this can take several minutes Firmware now updated, click on “Next” 0800 GARADOR (427 236) GARADOR.CO.
PAGE 5
Smart Hub Setup Guide Smart Phone App Page 4 Now you will need to link your opener or other device to the hub, click “+ Set up a new device” Select Opener and press “Next” Ensure your device is powered on and you have your registration code or QR card, Press “Next” “Garador” Would Like to Access the Camera Select the hub that you wish to connect your opener to (If you have multiple hubs) Click Scan QR Code or enter your registration code manually If using a QR code press “OK” so that you can scan it
PAGE 6
Smart Hub Setup Guide Smart Phone App Page 5 Scan your QR Code Wait for it to connect your hub to your opener / device Give your opener / device a name – i.e. Left Garage and press “Next” Choose any notiﬁcations you want from the app and press “Done” You have now connected – Press “Next” Set up complete – your smart opener is now ready to use. Press “Okay” to view your opener dashboard 0800 GARADOR (427 236) GARADOR.CO.