Data Sheet

www.ganzsecurity.com © 2015 CBC AMERICAS Corp. All Rights Reserved. 02/15
All specifications are subject to change without notice.
GWFE2SC(M,S)2
Commercial Grade 10/100 Mbps Ethernet Media Converter
SPECIFICATIONS
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Wavelength Connector
Fibers
Required Fiber
Optical Power
Budget Max. Distance
GWFE2SCM2 10/100 Mbps Ethernet (1310 nm) SC 2 Multimode 10dB 3 km (2 mi)
GWFE2SCS2 10/100 Mbps Ethernet (1310 nm) SC 2 Single Mode 15 dB 30 km (18.6 mi)
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50–60 Hz (Included)
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA
Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
Ethernet
Data Interface: Ethernet
Data Rate: 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port/
Full Duplex Optical Port
Connectors
Optical: SC, 2 Fibers
Power: 2.1mm Center Positive Plug
Electrical: RJ-45
Indicating LEDs - Optical Link/Data Activity
- Electrical Link/Data Activity
- Power
Power
Operating Voltage Range 8 to 24 VDC
Power Consumption 6W
Electrical & Mechanical
Current Protection Automatic Resettable
Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 4.7 × 3.3 × 1 in (11.9 x 8.5 x 2.6cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
 OperatingTemp  0˚Cto+50˚C
 StorageTemp  -40˚Cto+85˚C
Relative Humidity 0% to 95% (non-condensing)
1
2 Optical Fibers
EE
GWFE2SCM2
GWFE2SCM2
OPTICAL FIBER
CAT-5 CABLE