Installation Instructions

GAT NET.Lock 7020 System
Electrical Connections
www.gantner.com
HB_GAT-NETLOCK7020--EN_12
45
Connecting the power supply to the sub controller
Connect the power supply to the MOLEX plug labelled “Power” on the controller.
Figure 4.10 - Power supply connection on the GAT NET.Controller S 7020
For controllers with a non-USB power supply, the power supply can be stored in the designated storage space on
the side of the controller.
Remove the compartment cover (1),
Place the power supply into the compartment and insert the cabling into the designated slots on the base of the
controller.
Replace the compartment cover.
Figure 4.11 - Power supply storage location