Installation Instructions

Table Of Contents

GAT ECO.Side Lock 7000 BA / NW BA

Operation

www.gantner.com

HB_GAT-GAT-ECOSide-Lock7000-BA--EN_14

Locking and unlocking lockers

► Close the locker door and hold it shut.

► Hold the data carrier next to the RFID reading field.

o The information on the data carrier is read.

► a) Valid data carriers: The LED flashes green briefly and the locking action is carried out. If the duration of use

function is enabled, the time on the data carrier is checked and the current time written onto the data

carrier.

b) Invalid data carriers: The LED flashes red briefly and the GAT ECO.Side Lock 7000 BA does not complete

the locking action. Possible reasons for this include:

- Another locker has already been locked using the data carrier. In this case, the first locker must be unlocked

before the data carrier can be used with the new locker.

- The duration of use period has been exceeded and the locker cannot be opened anymore. In this case,

the data carrier must be reset at a central station.

► Release the locker door.

Free Locker Universal Mode

“Free locker universal” operating mode differs from the standard free locker mode in the following ways:

- Free locker universal mode allows the use of data carriers that are also used for other applications

- No validity date with free locker universal mode

- Not possible to use a duration of use time with free locker universal mode

- The following requirements for the data carriers apply:

1. The locker segment must be unused and "empty", i.e., coded with all zeros.

2. The Access Keys must be correct.