Installation Instructions
Table Of Contents
- 1 INTRODUCTION
- 2 GENERAL INFORMATION
- 3 INSTALLATION
- 3.1 Target Group
- 3.2 Definition of the Door Hinge (Right of Left Door)
- 3.3 Test Installation
- 3.4 Metallic and Non-Metallic Doors
- 3.5 Bolt Gauge
- 3.6 Door Status Contact
- 3.7 Transportation Guidelines
- 3.8 Replacement after a Burglary Attempt
- 3.9 Measurement Diagrams for Installation
- 3.10 Installation in Lockers with Non-Metallic Doors (Except Glass)
- 3.11 Installation in Lockers with Metallic Doors
- 3.12 Installation in Lockers with Glass Doors
- 4 COMMISSIONING
- 5 CONFIGURATION
- 5.1 General Information
- 5.2 Setup for Configuration in GAT Config Manager
- 5.3 View and Edit the GAT ECO.Side Lock 7000 BA Configuration Settings
- 5.4 Upload Configuration Settings to the GAT ECO.Side Lock 7000 BA
- 5.5 Updating the GAT ECO.Side Lock 7000 BA Firmware
- 5.6 Configuration Settings of the GAT ECO.Side Lock 7000 BA
- 6 OPERATION
- 7 CLEANING AND MAINTENANCE
- 8 TECHNICAL DATA
GAT ECO.Side Lock 7000 BA / NW BA
General Information
14
HB_GAT-GAT-ECOSide-Lock7000-BA--EN_14
www.gantner.com
2.5 System Components
The GAT ECO.Side Lock 7000 BA system consists of the following system parts.
Figure 2.1 – Components of the GAT ECO.Side Lock 7000 system
1. GAT ECO.Side Lock 7000 BA / NW BA
2. GAT NET.Lock BoltSet 7100
3. GAT NET.Lock BoltSet 7200
5. GAT NET.Lock Tool 7000
6. GAT NET.Lock Label GEA xxx
(Door labels in different designs)
For lockers with glass doors
For lockers with non-metallic
doors
4. GAT NET.Lock BoltSet 7300
8. GAT ECO.Basic Set B BA
For lockers with metallic doors
7. Battery
Tadiran SL-860/S (EU)
Tadiran TL-4903/S (US)
9. GAT Key Tag BA Open Master