Specifications

16 17

STEP 3 · SHOOTING

Put the SAFETY ON until you are ready to shoot.

3.1 Once the magazine is inserted, break the barrel (make sure

you fully cock it), and place it back to the initial position.

Do not put your hand or ngers between the multishot

system and the breech while placing the barrel back to the

shooting position.

Now the air rie is loaded and ready to shoot. It has a

pellet in the barrel breech.

3.2 When you are ready to shoot, release the safety

mechanism and pull the trigger.

3.3 To shoot a second pellet, activate the safety mechanism,

break the barrel again in order to rotate the magazine and automatically insert a second pellet into the breech.

3.4 Pull the barrel back to the initial position, and when you are ready to shoot, release the safety mechanism

and pull the trigger.

3.5 Repeat this operation until you have shot 10 pellets and the magazine window shows a warning triangle (the

magazine is empty).

WARNING:

This air rie is equipped with a manual safety which operates the same as the safety on a real rearm.

While Gamo recommends you engage the manual safety between each loading, this safety design allows

you to rapidly re multiple shots without touching the safety for each shot.

WARNING:

If you are not sure if a pellet is loaded in the breech, remove the magazine, break the barrel slightly down, as seen in

picture F, In the case of the 10X Quick-Shot, pull it up carefully in order to see if there is a pellet in the breech, see picture

G1. In the case of the 10X GEN2 Quick-Shot system, you do not need to pull up the system in order to see if a pellet is in

the breech, see picture G2. Never break the barrel all the way as you will accidentally load another pellet, see picture H.

Another option is to shoot the rie into a safe direction in order to make sure that there is no pellet in the breech.

Never break the barrel for more than one time without having shot the prior pellet loaded to the barrel breech. The

10X or 10X GEN2 Quick-Shot system is not designed to shoot more than 1 pellet at a time. If you break the barrel for

more than one time without shooting the prior pellet, you could load more than one pellet into the barrel. This could

damage the 10X or 10X GEN2 Quick-Shot system, please refer to “PROCEDURE FOR

CLEARING STUCK AMMUNITION” in order to remove the ammunition.

English

Always place the manual safety in the safe position when you are nished ring the air rie.

Always place the manual safety in the safe position when installing or removing the 10X or 10X GEN2 Quick-Shot magazine.

WARNING:

The warning triangle indicates that there are no pellets in the magazine, but there could be a pellet in the

barrel (the last one). Make sure that the last pellet has been shot.

FAILED COCKING. If at any time the cocking action is started but not completed or reversed before fully cocking the

gun, a pellet may have moved from the magazine into the chamber. If you start a second cocking, you may introduce

a second pellet into the chamber, forcing and eventually deforming or damaging the spring. To avoid this problem, if a

failed cocking has occurred, then pull the barrel back to its original position until it locks into place, remove the maga-

zine, progress forward to a complete cocking, and re it in a safe direction to clear any previously loaded pellets.

The magazine can then be returned to the gun, and start operating your air gun as usual.