Specifications

14 15
STEP 1 · LOADING THE PELLETS INTO THE MAGAZINE
Insert the pellets into the magazine with the tip facing down as seen in picture A. Insert the rst pellet into the
magazine. In order to insert a second pellet, rotate the magazine pellet holder in the direction of the arrows
marked on it. Repeat these last steps until you insert 10 pellets in it.
If you loaded your pellet backwards (skirt facing down), please operate according to “PROCEDURE FOR
CLEARING STUCK AMMUNITION”.
Never rely on any loading indicator or safety mechanism. ALWAYS treat your air rie as if it was loaded.
WARNING:
!
Please make sure that you have the safety ON at all times until you are ready to shoot.
WARNING:
!
The magazine has a window where you can see the quantity of pellets that are left. The maximum
capacity of the magazine is 10 pellets See picture B.
When the magazine is empty, ! symbol will show up in the magazine window. See picture C.
STEP 2 · INSERTING THE MAGAZINE INTO THE LOADER.
D
E
Please make sure that you have the safety ON at all times until you are ready to shoot.
Insert the magazine into the breech as indicated in picture D. Push it down until you hear the locking mechanism engage.
WARNING:
!
WARNING:
!
Make sure that you push the magazine down until you hear the locking mechanism engage.
In order to prevent the wrong insertion of the magazine, there is a notch in one of the sides of the magazine, see picture E.
CLICK !
English
English
FOR 10X QUICK-SHOT ONLY
D
E
FOR 10X GEN2 QUICK-SHOT ONLY
CLICK !
WARNING:
!
The warning triangle indicates that there are no pellets in the magazine, but there could be a pellet in
the barrel (the last one). Make sure that the last pellet has been shot.
In the case of the 10X Gen2: Make sure that you insert the magazine with the tab facing down towards the magazine
receiver and the cheekpiece.
Insert the magazine tab into the receiver and slide it smoothly towards the barrel, until you hear it engaging with the
loader mechanism.
MAGAZINE TAB
MAGAZINE RECEIVER
A B C
The 10X and 10X GEN2 Quick-Shot systems have different types of magazines, please make sure to
always purchase and use the appropriate magazine for your 10X Quick-Shot version.
WARNING:
!