Specifications
22 23
Your Gamo air rie comes with the scope unmounted. Please follow the instructions that come inside the box of the
scope to mount it on your air rie.
The sight picture should look like the examples. To sight in your rie, remove the caps covering the windage and
elevation adjustment knobs.
SIGHT PICTURE AND ADJUSTMENT
Turn the windage adjustment screw 1 (g.
B
) clocwise to move the point of
impact left and counter-clocwise to move the point of impact to the right.
WINDAGE ADJUSTMENT
Turn the elevation screw 2 (g.
B
) clockwise to lower the point of impact and
counterclockwise to raise the point of impact.
ELEVATION ADJUSTMENT
You must remove the protective battery cover before use. Pull the plastic tab to expose battery to contact. The
battery switch is located on left side of the scope saddle. The illuminated feature is activated by turning the rheostat
switch. Each click will increase the intensity. To turn off the illuminated reticle, turn the knob to the zero position.
To install the battery remove the cap of the rheostat. Place the battery in the rheostat face down and replace the
rheostat cap.
FOLLOW THESE INSTRUCTIONS IF YOUR GAMO RIFLE CAME WITH AN ILLUMINATED RETICLE SCOPE
B
1
2
For best performance and to avoid damage, treat the multishot system carefully: keep it clean, do
not force it, do not recline the rie in where the multishot system is in touch with anything, mainly
when the rie is being carried or stored.
Air guns should be carefully stored to prevent access by children and unauthorized users.
These products are designed to look, handle and function like ries. These products should
be stored in such a manner to protect against theft and subsequent misuse.
Remove the 10X Quick-Shot magazine from the air rie before storage.
Always check to see if the GAMO AIR RIFLE is unloaded when removed from storage or received
from another person.
Always store your GAMO AIR RIFLE after it has been cleaned and given a light coat of oil. Always
store your GAMO AIR RIFLE in a clean dry place. It is recommended that you store this product in a
GAMO case with appropriate anti-corrosion materials.
STORAGE
WHEN STORING YOUR RIFLE, ALWAYS MAKE SURE IT IS NOT COCKED, IT IS
UNLOADED AND THE SAFETY IS “ON”.
Lock your air gun in a safe place to prevent unauthorized access.
English
English
DISASSEMBLING THE FRONT SIGHT, ONLY APPLICABLE FOR 10X GEN2 QUICK-
SHOT MODELS WITH OPEN SIGHTS
This is only for air ries equipped with the 10X GEN2 Quick-Shot and have open sights. When seeing through the
scope, it is possible that you see the front sight of the air rie (this normally happens with scopes with adjustable
magnication and when the adjustment is below 4.5X). If that is something that bothers, the front sight can be disas-
sembeld (front sight cover and optionally the ber optic part).
In order to disassemble the front sight cover, it is recommended to use two small
screwdrivers (or similar tool) pulling both screwdrivers towards each other,
as seen in picture
C
.
C
Once the front sight cover has been removed, there is the option of also
removing the ber optics part. Just carefully slide to the side the ber
optics part to remove it from the barrel, as seen in PICTURE
D
.
D