Operation Manual

Time and Date

Displaying Time and Date

• Press the button to view the time. The display

shows the set time and the symbol.

Press the button a second time to view the date.

The display shows the set date as well as the symbol.

Setting the time

• First, view the time by pressing the button. Then

press the button to set the hours. Both hour digits

ash in the display. Use the and buttons to set the

hour forward or backward as desired. Conrm the set

value with the button and move on to set the minutes.

• Press the button a second time to set the minutes.

Both minute digits ash in the display. Use the and

buttons to set the minutes forward or backward as

desired. Conrm the set value with the button and

move on to set the seconds.

If you wish to set the seconds as well, press the

button a third time. The display shows the two minute

digits together with the ashing digits for the seconds.

Use the and buttons to set the seconds forward or

backward as desired. Conrm the set value with the

button.

Setting the Date

• Press the button twice to view the date display.

Then follow the description for “setting the time”.

You can stop setting the clock at any time by pressing the

button. To stop setting the year, press the button a

fourth time.

GAMMA-SCOUT

has an integrated quartz clock (pushbutton display). Time and date are required

to ensure that the measured radiation is accurately logged. Using a function in the data read-out

program of the TOOLBOX software, the GAMMA-SCOUT

date and time can be synchronized to a

PC. Choose the menu “Set any time” to set your choice of date and time (e.g. different time zones)

on the GAMMA-SCOUT