User Guide

26 27
In Auto Type, the attack you execute will
be automatically chosen by the AI. Just
keep hitting the Attack button and the AI
will decide which attack is the most
effective in the given situation (based on
Weapon Gauge and VR position).
Attack varies based on
distance of your target.
ADVICE FROM SGT. HATTER
Yeah! Glad to see you join us!
I, Sgt. Hatter will teach all there is
to know about operating your
Virtuaroids.
ADVICE FROM SGT. HATTER
ADVICE FROM SGT. HATTER
LESSON 1: AUTO TYPE
Auto Attack
When you are within range for a Close Range Attack, simply use
F or D button to execute. If you are operating a Temjin 707S in
this situation, just hold down on that button and convert up to 3
combo attacks. The third hit of this combination is so strong,
you can damage an enemy even if their Guard is up!
Up to 3 combo attacks
by holding down your
button.
Use Z or X button
and attack an enemy
from behind.
Use V button for a
Close Range Upper
Attack.
Auto Close Range Attack
Use F button to attack during Dash to perform
what is called a ‘Dash Attack.’ This Dash Attack
will vary in shots and fire power depending on
the motion of the Dash. What you want to keep
in mind is that the most effective Dash Attack is
executed during forward Dash. Aim to hit the
enemies this way before trying any other
Dash Attacks!
The forward Dash Attack can also be executed
from a diagonal or lateral Dash, by just releasing
the directional button (left analog stick), and
then press
F button. Using this technique, you
will have better transitions in your attacks!!
Dash forward for
the most effective
Dash Attack
Use Various Dash
In Auto Type, the AI will detect enemy
attacks and will automatically put up your
Guard. Auto Guard is not available during
Dash or attack. When the enemy strikes
for a Close Range Attack, just hold still or
jump right away for evasive action!
Hold still for Auto Guard!
Auto Guard
Use D button when you want to perform an
explosive attack! But make sure the
Weapon Gauge is charged or else it will only
be a normal attack. The Special Attack will
vary on the VR you operate.
Use the Weapon Gauge!
When there is more than one enemy, use
either
Q, W, E, or R button to
change the enemy you would like to take. If
you successfully switch, a line is displayed
to guide where your target enemy is at.
Tap the
A button to face your new target!
Cannot change target
while on an attack.
Switch Your Target Enemy
It is critical not to lose sight of the enemy
during your battle. Quickly tap the
A button
to jump. This will cause your VR to rotate
towards where the target enemy is at.
A button and rotate!
Performing Strong Attack
Losing Sight of Enemy VR