User Guide

Set up your PlayStation®2 computer entertainment system according
to the instructions in its Instruction Manual. Make sure the
MAIN
POWER
switch (located on the back of the console) is turned ON.
Press the RESET button.
When the power indicator lights up, press the
OPEN button and the disc
tray will open. Place the
TOTAL OVERDOSE
™
disc on the disc tray
with the label side facing up. Press the
OPEN button again
and the disc tray will close.
Attach game controllers and other peripherals, as appropriate.
Follow onscreen instructions and refer to this manual for information
on using the software.
Memory Card (8MB) (for PlayStation
®
2)
To save game settings and progress, insert a memory card (8MB)
(for PlayStation®2) into MEMORY CARD slot 1 before powering on
the console.
• At least
720KB of free space on the memory card is required to save
game data.
• This game supports saving (and loading) game data in MEMORY CARD
slot 1 only. You can load saved game data from the same memory card
or from any memory card containing previously saved
TOTAL
OVERDOSE
games.
• To ensure that another player’s game doesn’t overwrite your data,
we recommend that each player save game data to a separate memory
card.
* Note: Illustration may not match all PlayStation 2
console types. For owners of SCPH-70000 series
PlayStation 2 systems, refer to the setup
instructions supplied with your system.
GETTING STARTED
*
CONTROLLER
2
DUALSHOCK
®
2 analog controller
configurations
Connect the DUALSHOCK®2 analog controller to controller port 1
before starting play.
• When the vibration function is
ON, the controller will vibrate
in response to game events.
• You can reconfigure the default controls and toggle the vibration
function
ON/OFF in Options mode (page 8) .
3
TOd ps2 final 8/25/05 7:15 PM Page 2