User Guide

3
2
getting started
controller
Set up your PlayStation
®
2 computer entertainment system according to the instructions
supplied with your system. Check that the system is turned on (the on/standby indicator is
green). Press the OPEN button to open the disc cover. Place the
RESERVOIR DOGS
™
disc
with the label side facing up in the disc holder, and then close the disc cover. Attach game
controllers and other peripherals as appropriate. Follow the on-screen instructions and refer
to this manual for information on using the software.
MEMORY CARD (8MB)(for PlayStation
®
2)
To save game settings and progress, insert a memory card (8MB)(for PlayStation
®
2)
into MEMORY CARD slot 1 before powering on the system. At least 120KB of free space
on the memory card is required to save game data.
This game supports saving and loading of game data in MEMORY CARD slot 1 only.
You can load saved game data from the same memory card or from any memory card
containing previously saved
RESERVOIR DOGS
™
games.
Before starting play, connect the DUALSHOCK
®
2 analog controller to controller port 1.
• You can turn the controller’s vibration function on/off in Option Mode
(see page 8). When vibration is on, the controller will vibrate in response
to game events.
open button
on/standby/
reset button
IR receiver
USB connectors
disc cover
controller port 1
controller port 2
memory card slot 1
memory card slot 2
button
button
button
button
directional
buttons
left analog stick
(L3 button
when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button
when pushed down)
L2 button
L1 button
R2 button
R1 button
DUALSHOCK
®
2 ANALOG CONTROLLER CONFIGURATIONS
MENU CONTROLS
Select option directional buttons / left analog stick
Action / Confirm settings x button
Back t button
resdogs ps2 final.qxd 9/8/06 5:35 PM Page 2