User Guide
Set up your PlayStation
®
2 computer entertainment system according
to the instructions in its Instruction Manual. Make sure the MAIN POWER
switch (located on the back of the console) is turned ON.
Press the RESET button. When the power indicator lights up, press the OPEN
button and the disc tray will open. Place the HITMAN: CONTRACTS disc
on the disc tray with the label side facing up. Press the OPEN button again
and the disc tray will close.
Attach game controllers and other peripherals, as appropriate. Follow
on-screen instructions and refer to this manual for information on using
the software.
Memory Card (8MB)(for PlayStation
®
2)
To save game settings and progress, Insert a memory card (8MB)(for
PlayStation
®
2) into MEMORY CARD slot 1 of your PlayStation
®
2 system. You
can load saved game data from the same memory card or any memory card
(8MB)(for PlayStation
®
2) containing previously saved games.
NOTE: Only MEMORY CARD slot 1 is used to load and save game data.
The digital controller cannot be used to play HITMAN: CONTRACTS.
SETTING UP
DUALSHOCK
®
2 ANALOG CONTROLLER
CONFIGURATIONS
2
3
MEMORY CARD slot 1
MEMORY CARD slot 2
USB connector
S400 i.LINK connector
controller port 1
controller port 2
disc tray
RESET button
(OPEN) button
button
button
button
button
directional
buttons
left analog stick
(L3 button when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button when pushed down)
L2 button
L1 button
R2 button
R1 button
Before starting play, connect the DUALSHOCK
®
2 analog controller to
controller port 1. When the Vibration function is ON, the controller will vibrate
in response to game events. You can turn the Vibration function ON/OFF from
the Options Menu. (See page 8.)
ACCESSORIES
Do not insert or remove memory cards, controllers or other accessories
when the PlayStation 2 is powered on.
HC PS2 final 3/24/04 11:56 AM Page 2