User Guide

Set up your PlayStation
®
2
computer entertainment
system according to the
instructions in the manual.
Make sure the MAIN POWER
switch (located in the back
of the console) is turned ON.
Press the STANDBY/RESET
button. When the power
indicator lights up, press the OPEN button and the disc tray will
open. Place the FREQUENCY™ disc on the disc tray with the label
side facing up. Press the OPEN button again and the disc tray will
close. Attach game controllers and other peripherals, as appropriate.
Note: FreQuency supports analog and DUALSHOCK™ / DUALSHOCK™2
analog controllers, but not digital-only controllers.
Follow on-screen instructions and refer to the manual for
information on using the software.
Memory Cards
To save game settings and progress, insert a Memory Card
(8MB) (for PlayStation
®
2) into MEMORY CARD slot 1 of your
PlayStation
®
2 computer entertainment system. You can load saved
game data fromthesamecard, or from any Memory Card (8MB)
(for PlayStation
®
2) containing previously saved FreQuency games.
• Use Memory Card (8MB) (for PlayStation
®
2) slot 1 for Solo play.
• To copy game data from one Memory Card (8MB)
(for PlayStation
®
2) to the other, use Memory Card
(8MB) (for PlayStation
®
2) slots 1 and 2.
Multitap and Memory Cards
In Multi Mode, you may use Memory Card (8MB) (for PlayStation
®
2)
slots 1 & 2 for 2 player games. For 3 & 4 player games, use the
Multitap in Controller Port 1, and insert up to four Memory Cards in
4 5
Memory Card (8MB) (for PlayStation
®
2) slots 1-A, 1-B, 1-C and 1-D.
For information, see “Saving and Loading Game Data” on page 31.
Multitap (for PlayStation
®
2)
For a 3 & 4 Player game, use a Multitap (sold separately). Each
player will need a controller. Connect the Multitap to Controller Port
1 of the PlayStation
®
2 computer entertainment system. Then
connect the controllers to the controller ports on the side of the
Multitap. You cannot use the Multitap in Controller Port 2. When the
Multitap is connected to Controller Port 1, you cannot connect a
controller to Controller Port 2.
Menus
Start/Pause game....................................÷ button
Select menu item . . . . . . . . . . . . . . . . . . . . . . . . . . Directional button
or left analog stick UP/DOWN/LEFT/RIGHT
Confirm Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≈ button
Back to previous screen . . . . . . . . . . . . . . . . . . . . . . . . . . .ç button
Refresh Memory Card (8MB)
(for PlayStation
®
2) display on Options screen . . . . . . . . . .Ω button
Display virtual keyboard where it’s accessible . . . . . . . . .Ω button
RESET
button
MEMORY CARD slot 2
MEMORY CARD slot 1
USB connector
S400 i.LINK connector
controller port 1
controller port 2
disc tray
(OPEN)
button
SETTING UP YOUR CONSOLE
CONTROLS
FINAL Freq Manual For Print2 10/10/01 11:00 AM Page 4