User Guide

2
3
STARTING UP
GETTING STARTED
CONTROLLER
• The controller should be connected to controller port 1. Do not insert or remove
the controller or accessories once the power is turned on.
• The DUALSHOCK
®
2 analog controller’s ANALOG mode button and mode indicator
are always ON, indicating that the controller is in analog mode.
• When the controller’s vibration function is set to ON (default), the controller will
vibrate in response to game events.
MEMORY CARD
If you wish to save your progress in DEUS EX: THE CONSPIRACY
™
, make sure that you
have a memory card (8MB) (for PlayStation®2) inserted in MEMORY CARD slot 1
with 600KB of free space, before you start your game.
DUALSHOCK
®
2 ANALOG CONTROLLER CONFIGURATIONS
Set up your PlayStation®2 computer entertainment system according to the instructions
in its Instruction Manual. Make sure the MAIN POWER switch (located on the back
of the console) is turned on. Press the RESET button.
When the power indicator lights up, press the open button and the disc tray will open.
Place the
DEUS EX: THE CONSPIRACY
™
disc on the disc tray with the label side facing up.
Press the open button again and the disc tray will close.
Attach game controllers and other peripherals, as appropriate. Follow on-screen
instructions and refer to this manual for information on using the software.
MEMORY CARD slot 1
MEMORY CARD slot 2
USB connector
S400 i.LINK connector
controller port 1
controller port 2
disc tray
RESET button
(OPEN) button
button
button
button
button
directional
buttons
left analog stick
(L3 button when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button when pushed down)
L2 button
L1 button
R2 button
R1 button
DX PS2 final 3/8/02 10:34 AM Page 2