User Guide

Operation
DualShock™2 analog controller
controller
This game is designed for use by one to four players.
This section describes basic controller operations.
LED
light
L1/L2 buttons
DIRECTIONAL button
SELECT button
Combine with the Directional button for free steps.
Changing screens, displays, etc...
LEFT ANALOG STICK / RIGHT ANALOG STICK
Used for free steps during operation in
Analog mode (LED stays red).
Not Used
ANALOG Mode Switch
Turning this on enables Analog mode.
The LED lights continuously in red.
Controlling characters
Menu selection, etc.
R1/R2 buttons
button
button
button
button
START button
(Multi-function button
for holds, guarding,
free steps, etc.)
PUNCH
FREE
KICK
THROW
(Evade Throw)
Pause during game
Start game
Executing menu commands, etc.
Tag change (for use during Tag battle only)
Changing screens, displays, etc...
Cancel menus, etc.
++
Operations shown in black letters are battle operations.
represents the Square button in the game.
Likewise, represents the Triangle button and represents the Circle button.
+
Game Reset: To reset the game and return to the Title screen during a
game, press the START button and SELECT button at the same time.
* To play with two or more players, you will need to
purchase additional Controllers (sold separately).
* Use the Option mode (page 21) to switch the
Vibration function on and off. If the Vibration
function is on, the controller will vibrate regard
less of the setting of the ANALOG mode switch.
* The operation method shown uses the default
button assignments. Use CONTROLLER SETTING
in Option mode to change settings.
* Pressing the START button pauses the game.
4 5