User Guide

~ 2 ~ ~ 3 ~
GETTING STARTED DEFAULT CONTROLS
Set up your PlayStation
®
2 computer entertainment system according to the instructions
in its Instruction Manual. Make sure the
MAIN POWER switch (located on the back
of the console) is turned
ON. Press the RESET button. When the power indicator lights
up, press the
OPEN button and the disc tray will open. Place the COMMANDOS
STRIKE FORCE
™
disc on the disc tray with the label side facing up. Press the OPEN
button again and the disc tray will close. Attach game controllers and other peripherals,
as appropriate. Follow on-screen instructions and refer to this manual for information
on using the software.
MEMORY CARD (8MB)(for PlayStation
®
2)
To save game settings and progress, insert a memory card (8MB)(for PlayStation
®
2)
into MEMORY CARD slot 1 before powering on the system. At least 450KB of free space
on the memory card is required to save game data.
This game supports saving and loading of game data in MEMORY CARD slot 1 only.
You can load saved game data from the same memory card or from any memory card
containing previously saved
COMMANDOS STRIKE FORCE
™
games.
Connect the DUALSHOCK
®
2 analog controller to controller port 1 before starting play.
When the vibration function is
On, the controller will vibrate in response to game
events. You can reconfigure the controls and toggle the vibration function
On/Off
in Options mode (page 5).
Note: All controls used in this manual are the default controls.
MENU CONTROLS
❑
Use the directional buttons to view and cycle through the game options.
❑
Press the x button to select an option, change a current option, confirm
any changes made or progress to the next screen.
❑
Press the t button in a submenu to return to the previous screen.
open button
on/standby/
reset button
IR receiver
USB connectors
disc cover
controller port 1
controller port 2
memory card slot 1
memory card slot 2
button
button
button
button
directional
buttons
left analog stick
(L3 button
when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button
when pushed down)
L2 button
L1 button
R2 button
R1 button
DUALSHOCK
®
2 ANALOG CONTROLLER CONFIGURATIONS
csf ps2 final.qxd 3/2/06 3:59 PM Page 2