User Guide

NOTE: When the TMA Auto Crewman is ON you cannot adjust solutions at the TMA Station If you
attempt to move the TMA Ruler or make entries in the Trial Solution Fields, your TMA Auto
Crewman moves them back to the settings he entered.
Sonar Auto Crew: When ON, the Sonar Auto Crewman marks contacts in Narrowband sonar and
assigns trackers. (Trackers appear in both Narrowband and Broadband Displays) He then
commences classifying the contact in Narrowband. Once classified the contact’s symbol on the Nav
map changes shape to reflect the classification determined by the Sonar Auto Crewman.You must
still assign an alliance to the contact from the Contact menu’s Designate Type/Alliance>Alliance
option. See Ship Station/Navigation Station/Contact Menu on p. 45.
NOTE: When Sonar Auto Crewman is ON you can still assign trackers and mark contacts. In some
cases you may be quicker than he is.You can also move the Narrowband Cursor to
designate the search area for the
Sonar Auto Crewman .
Fire Control Auto Crew: When ON, the Fire Control Auto Crewman enters presets appropriate for the
contact.
NOTE: Be aware that if you designate a contact as a surface ship when it is really a submarine, the
Fire Control Auto Crewman enters presets appropriate for a surface ship. He uses your
classification and the existing TMA firing solution to determine appropriate presets, even if
your classification and firing solution are wrong.
For more detailed information on Auto Crew functionality, see Ship Stations/Auto Crewmen on p.
146.
■ Setting Novice Defaults turns ON all Auto Crew options.
■ Setting Advanced Defaults turns OFF all Auto Crew options.
SOUND: Enable voice commands as well as in-game sound and music options.A list of available
English voice commands is found in VoiceCommands.doc located on the Sub Command CD.
CONTROLS: Displays hot key assignments for the 2D Map, 3D View and General game functions.
Hot key assignments can be changed here. See Options/Changing Hot Key Assignments below.
MULTIPLAYER: These options are only available to the host in a multiplayer game. Options you set
here are enabled when you host a Multiplayer game. If you join a Multiplayer game any options you
set here are disabled.When you host you can also set these options from the Game Room. See
Multiplayer/Multiplayer Options on p. 157.
CHANGING HOT KEY ASSIGNMENTS
To change hot key assignments from the Options>Controls pages:
1. Double-click the text of the option you want to change.The option is highlighted and the text
changes color.
2. Press the desired new key or key combination.An alert message appears if that key or key
combination is already assigned to another command and displays the name of the command
currently assigned the key(s) you pressed.
■ Click YES to swap the two key assignments.
■ Click NO to maintain the current hot key settings.
3. Click OK at the bottom of the Options menu to accept all changes or click CANCEL to ignore all
changes and retain your previous settings.
31
Sub Com PC elec manual.qxd 7/25/01 4:59 PM Page 31