User Guide
MINE PROPERTIES
When a mine is selected on the map, the following options for that mine appear on the Object
Properties Panel.
PAGE ONE
Side:
Assign the side to which the mine belongs.
Name:
Specify the type of the selected mine.The mine type selected when the minefield was
created is shown by default.
Depth:
Specify the depth of the selected mine.The depth in feet designated when minefield was
created is shown by default.
PAGE TWO
Probability of Inclusion:
This is the percentage chance an object appears in the mission play.
Latitude:
Adjust the latitude of the mine.
Longitude:
Adjust the longitude of the mine.
SHIP PROPERTIES
There are three pages of object properties for most ships.Aircraft Carriers and ships with
embarked helicopters with the have a fourth page shown below.
PAGE ONE
Side:
Select the object’s side.You can designate up to seven sides plus neutral. To set alliances
between sides, see Mission Editor/Editor Menu/Edit Menu/Side Alliances on p. 170.
Country:
Select the object’s nation.
Class Designation:
Select the object’s class.
Name:
Select the specific vessel name, or hull number for some classes.
Tactic:
Choose the object’s tactic from one of those listed. Click in the map and drag to place the
tactic around the platform.To delete the current tactic just select a different tactic from the drop-
down list. Descriptions of all tactics are described in Appendix C:Tactics on p. 202.
Speed:
Enter the desired speed of the platform in knots.
Target Mode:
Assign a special tactic for the object to follow when it encounters the platform
selected in
Target Platform
drop-down.
None:
No special tactic is assigned.The object uses the tactic assigned in the
Tactic
drop-down.
Attack:
The object attacks the platform selected in Target Platform as soon the object detects
the platform.
Track:
The object tracks (trails) the platform selected in Target Platform as soon as the object
detects the platform.
Target Platform:
Lists all objects in the mission.The object applies the Target Mode set above to
the platform selected in this drop-down.
PAGE TWO
Probability of Inclusion:
This is the percentage chance the object appears at the start of the
mission.
Latitude:
Shows the starting latitude of the platform. Enter the desired latitude if a precise location
is required.
184
Sub Com PC elec manual.qxd 7/25/01 5:00 PM Page 184