User Guide

SEAWOLF TARGET DISPLAY
Seawolf’s Target Display consists of the Fire Control map, the Tube Selection Panel and the Target
Designation and Preset Panel. From the Target Display the weapon in a specific tube is targeted at
a specific contact and weapon presets appropriate for the target are entered.
The Fire Control map is covered in Fire Control Suite/Fire Control Map on p. 115.The rest of
Seawolf’s Target Display is described here.
Tube Selection Panel
The lower left of the Target Display contains the Tube Selection Panel.A number represents each of
the Seawolf’s eight torpedo tubes.Following each number are two small display windows.The
lower window,the Weapon window, displays the name of the weapon loaded in the tube.The
upper window,the Target window, displays the Contact ID or target assigned to the weapon.
Dashes indicate that no target is assigned to the weapon in that tube.
• Click a tube number to select it.
NOTE: TLAMS and SLMMs are not assigned Contact IDs.Waypoints are placed on the map for the
weapon to follow.
WYPT appears in the Target Window when waypoints have been assigned
to TLAMS or SLMMs.A UUV is a sensor and can not be assigned a target.
Target Designation and Presets Panel
The upper right side of the Target Display contains the Target Designation and Presets Panel.The
following options are available.
Center OS: When this option is selected the map symbol for Ownship is always centered in the Fire
Control map when the map is zoomed in.
116
Fire Control Map
Target Designation and
Presets Panel
Designate Target Drop-down
Assign Target
Weapon Presets
Tube Selection Panel
Fire Control Station Selection
Buttons
Tube Number
Weapon Window
Target Window
Sub Com PC elec manual.qxd 7/25/01 4:59 PM Page 116