User Guide

Speed: Set the speed at which the weapon travels.
UUV PRESETS
Use OS Depth: Set the depth at which the UUV travels to that of Ownship. Use OD Depth is selected
by default. Deselect the option to display the Depth option.
Depth: Enter the desired depth for the UUV to travel. Click a digit to increment the value.Right-click
to decrease the value.
FIRE CONTROL MAP
Each controllable sub has a Target Display containing the Fire Control map.All map contact
symbols seen on the Nav map are also seen on the Fire Control map. Latitude, longitude and depth
readouts are on by default and the range scale is visible.
The TMA solution data for a selected contact appears in the upper left corner of the map.This
solution data is constantly updated assuming the course and speed designated when the solution
was entered in TMA.This information is used by the Fire Control System to predict the location of
the target so the weapon can steer an intercept course until it is close enough to detect the target
and begin homing.
CONTACTS WITH LINES OF BEARING
Contact symbols that appear at the end of a line of bearing (LOB) do not yet have TMA solutions.
When these are selected, the TMA solution fields display only dashes.
If a contact has only a LOB (no TMA solution) you can not assign that Contact ID to a tube. You
must select Snapshot and enter the bearing to the contact in the Snapshot (brg) preset field.
NOTE: If Show Truth is ON, no TMA contact solution data appears on the map when a truth contact
is selected and no Contact IDs are listed in the contact drop-down list. Contact IDs are only
available when Show Truth is OFF. Only snapshots can be fired at truth contacts from the Fire
Control Station.Assign Snapshot and enter the bearing to the truth contact.
Fire Control Map Controls:
• Press
v
and click the map to zoom in on the clicked location.
• Press
v
and right-click to zoom out.
• When the map is zoomed in, click and drag on the map or use the arrow keys to adjust the map
view.
SEAWOLF: FIRE CONTROL SUITE
Seawolf has four stations in its Fire Control Suite.These are reached by clicking one of the buttons
at the bottom left of each of the Seawolf’s Fire Control Stations.
115
Target Display
Launch Panel
Countermeasure
Launch Panel
Weapons Inventory
Sub Com PC elec manual.qxd 7/25/01 4:59 PM Page 115