User Guide

MINE PRESETS
Mobile Mine and SLMM
Mines display the following presets:
Define Target Waypoints: Click DEFINE TARGET WAYPOINTS then click the Fire Control map to place
a single waypoint.
Latitude/Longitude: Click the waypoint to display presets for setting the precise latitude and
longitude for the waypoint.These coordinates define the final destination of the mine. Click the
digits in the preset panel to set the desired value.You can also click a waypoint and drag it to the
desired location.Watch the Latitude/Longitude readout in the lower left of the Fire Control map
when dragging a waypoint to determine the waypoint’s current location.
MISSILE-TORPEDO PRESETS
SS-N-16 Stallion and SS-N-27 ASW
The following presets are available.
Snapshot Bearing (deg): The weapon is fired on the bearing entered here. (This preset only appears
if
Snapshot is assigned to the tube from the Target drop-down list.)
Run To Enable: Sets the point in yards at which the missile drops its torpedo payload.The torpedo
falls to the water and enables at once.
ROCKET TORPEDO PRESETS
Shkval
This weapon has the following presets.
Snapshot Bearing (deg): The weapon is fired on the bearing entered here. (This preset only appears
if Snapshot is assigned to the tube from the Target drop-down list.)
Depth: Sets the depth at which the weapon travels.
Run To Enable: Sets the distance the weapon travels before its sensor enables. (The minimum RTE
for this weapon is 2000 yards.)
TORPEDO PRESETS
Mk 48 ADCAP, 53-65K, 53 cm, 65 cm Torpedoes
The following presets are available for torpedoes.
Snapshot Bearing (deg): The weapon is fired on the bearing entered here. (This preset only appears
if Snapshot is assigned to the tube from the Target drop-down list.)
Depth: Set the depth at which the weapon travels.
Ceiling: Set the depth above which the weapon does not travel.
Floor: Set the depth below which the weapon does not travel.
Active (Seawolf) /Acoustic (688(I) and Akula): Chose Active or Passive sonar mode. Active mode
transmits active pings and follows the returns. In passive mode the weapon does a passive sonar
search.
■ Seawolf: The Active field is selected by default.When Active is deselected the weapon is in
passive mode.
■ Akula: The 53-65K torpedo is a wake homing torpedo. It has no Acoustic setting.
Run To Enable: Set the distance the weapon travels before it enables and starts its active search.
Enabling the weapon too soon can alert the target in time to take evasive measures. Enabling too
late can mean the weapon runs past the target.
114
Sub Com PC elec manual.qxd 7/25/01 4:59 PM Page 114