User Guide

8
CONFIG.SYS using QEMM 6.0, 6.02 or 7.0 (EMS)
DEVICE=C:\QEMM\QEMM386.SYS RAM
DOS
=HIGH
FILES
=25
BUFFERS=25
DEVICE=C:\QEMM\LOADHI.SYS C:\DOS\DBLSPACE.SYS /MOVE
Include the previous line only if you are using DoubleSpace with DOS 6.0 or 6.2.
DEVICE=C:\QEMM\LOADHI.SYS C:\(drivers)
Add your CD-ROM driver(s) to the previous line just as they appear in your
original hard drive CONFIG.SYS.
DEVICE=C:\QEMM\LOADHI.SYS C:\MOUSE\MOUSE.SYS
You may need to adjust the path in the previous line, depending on the location of
your mouse driver.
SHELL=C:\DOS\COMMAND.COM C:\DOS /D
Exit and save this file by typing:
aF
X
Y
If you are using QEMM, you can also use the Optimize program to optimize your system
setup. See your QEMM documentation for more information.
CONFIG.SYS using HIMEM.SYS (XMS with DOS 5.0, 6.0, 6.2, Windows 3.1)
DEVICE=C:\DOS\HIMEM.SYS
DOS
=HIGH
FILES
=25
BUFFERS=25
SHELL=C:\DOS\COMMAND.COM C:\DOS /P
DEVICE
=C:\(drivers)
Add your CD-ROM driver(s) to the previous line just as they appear in your
original hard drive CONFIG.SYS.
DEVICE=C:\MOUSE\MOUSE.SYS
You may need to adjust the path in the previous line, depending on the location of
your mouse driver.
Exit and save this file by typing:
aF
X
Y
Note that an XMS boot disk needs only 527K base RAM free to run Strike Commander
CD, rather than 557K. However, if you’re using DoubleSpace, you may not be able to
free enough base RAM to play. Note that the XMS CONFIG.SYS we recommend does
not use DoubleSpace.
AUTOEXEC.BAT
You will also need an AUTOEXEC.BAT file on your boot disk. To create one, type:
EDIT A:\AUTOEXEC.BAT e