User Guide

4
INSTALLATION
When presented with a menu, press W and Z to move through the list, then press e
to accept the highlighted selection. You may abort the installation process by pressing
q or selecting the
ABORT menu option.
1. Insert the CD-ROM (label side up) into your CD-ROM drive. Some drives may
require that you put the disk into a CD caddy before inserting it in the drive.
2. Change to your CD-ROM drive by typing the letter of the drive and a colon, then
pressing e.
3. Type
INSTALL.
4. The program prompts you for the letter of the hard drive to which you want your
system configuration data and saved games written. Press the letter on your keyboard
corresponding to a hard disk with adequate space. If you specify an invalid drive, the
program will prompt you again.
5. You are prompted for the sound card you are going to use for music. If you do not
have a sound card, you can select
NOTHING. Your choices are:
NOTHING
AD LIB
ROLAND
/ LAPC-1
GENERAL MIDI
ANY SOUND BLASTER
WAVE BLASTER
PRO AUDIO SPECTRUM
ABORT INSTALLATION
6. You are asked for the sound card to use for digital effects. If you do not have a
sound card, you can select
NOTHING. Your choices are:
NOTHING
SOUND BLASTER
SOUND BLASTER PRO
PRO AUDIO SPECTRUM
ABORT INSTALLATION
7. If you select any of the Blaster cards (SOUND BLASTER, WAVE BLASTER, etc.), you are
prompted for the Base I/O and IRQ settings of the card. The install program will initially
highlight the default values for these; if you have changed either your cards I/O or its
IRQ, select the correct value(s) and press e. Note that older Sound Blaster cards
have a default IRQ of 7 (rather than 5). Use W and Z to highlight each appropriate
selection, then press e.
8. You are asked if your system is equipped with a local bus video card. If it is, choose
this option for a slight improvement in performance. (If you do not have a local bus
video card, choosing this option slows performance.)
9. You are given several installation options at this point. You must always install the
primary executable and the current game map, so this is not given as an option. These
basic files take less than 2 megs of hard drive space.