User Guide

It is important to note that a Terminator who has not been moved,
defaults into Overwatch. Also, a Terminator who is in Overwatch
and facing a wall, turns to face an open space.
Now left-click on the square you want the Terminator to move to.
A line of red arrows appears marking out the shortest route from
the Primary Terminator to the destination you hove chosen.
Note: When selecting a destination there moy be a Terminator in
the square you wish to choose. If you find that clicking with the
mouse results in the Terminator being selected, use the TAB key.
Note: Be careful using this method as every click of the
mouse uses up one of the five order phases.
After planning a move you can finish the process by left-clicking
on the ‘Go’ Command icon, selecting another Terminator or
switching to Real Time.
Duplicating an Order
There are times when you want more than one Terminator to carry
out the same order.
Select
a Terminator. Be sure he is at the front of the group you want
to move.
Hold down the Shift key and click on the other Terminator’s
number in the Squad Roster or press F1 to F10 on the keyboard (if
he is Terminator 3 you would press
F3).
In the squad roster an arrow appears next to the Terminators you
hove selected.
Use the Command Icons to plan an order. The selected Terminators
all follow the route.
You
can order all the Terminators in one squad to follow the some
movement.
Turning
Because the program automatically adds a turn when you select a
route that includes a corner it is not always necessary to add them
to the command.
The Turn command is used in situations when you need to face
a
Genestealer or can’t handle turning the Terminator yourself in the
View Screen.
Depending on the direction you want to turn, left-click or right-
click on the Turn icon. The command is then added to the Order
Phases.
Using weapons
The Terminators usually carry two weapons. A long-range weapon
such as a Storm Bolter, and a Close Range weapon such as a
Power Glove.
Close Range weapons are used against Genestealers when they are
face to face with the Terminator. You have no control over their use.
If
a close combat situation arises the program determines whether
or not to use the Close Range weapon.
The Planning screen lets you fire weapons at a specific square. To
find out what squares you can target use the Range of Fire icon at
the Planning Screen.