User Guide

MICROSOFT TRAIN SIMULATOR ENGINEER’S HANDBOOK
HOW TO DRIVE AN ELECTRIC LOCOMOTIVE | 56
OPERATING AN ELECTRIC LOCOMOTIVE
Moving the train
The locomotive has been unlocked and activated for you.
To move the train
1. Raise the pantograph if it’s not already up.
2. Set the Reverser handle to Forward or Reverse.
3. Release all brakes.
4. Slowly increase the throttle.
Stopping the train
To apply brakes
Move the brake handle towards the full application position.
To reduce braking effort
Move the brake handle towards the release position.
Passenger comfort is a key sign of a good driver—proper braking is crucial. The best way to come
to a smooth stop is by coasting to a stop. You can do this by bringing the throttle back to 0 (zero) as
you approach the platform. When you are ready to come to a stop, apply only as much brake as you
need to bring the train to a gentle stop. Stop the train and then apply full brakes while the passengers
get off and on.