User Guide

ManualsBrandsGames PC ManualsOtherDESKTOP DYNO 2000

Dyno2000 Advanced Engine Simulation—3

The text, photographs, drawings, and other artwork (hereafter referred to as information) contained in this publication is

provided without any warranty as to its usability or performance. Specific system configurations and the applicability of

described procedures both in software and in real-world conditions—and the qualifications of individual readers—are be-

yond the control of the publisher, therefore the publisher disclaims all liability, either expressed or implied, for use of the

information in this publication. All risk for its use is entirely assumed by the purchaser/user. In no event shall Motion Soft-

ware, Inc. be liable for any indirect, special, or consequential damages, including but not limited to personal injury or any

other damages, arising out of the use or misuse of any information in this publication. This book is an independent publi-

cation of Motion Software, Inc. All trademarks are the registered property of the trademark holders.

The publisher (Motion Software, Inc.) reserve the right to revise this publication or change its content from time to time

without obligation to notify any persons of such revisions or changes.

This publication is the copyright property of Motion Software, Inc.,

and photographs in this publication are the copyright property of

Motion Software, Inc. It is unlawful to reproduce—or copy in any

way—resell, or redistribute this information without the expressed

written permission of Motion Software, Inc. This PDF document

may be downloaded by Dyno2000 users and prospective buyers

for informational use only. No other uses are permitted.

ACKNOWLEDGMENTS: Larry Atherton of

Motion Software wishes to thank the many

individuals who contributed to the develop-

ment and marketing of this program:

Lance Noller, Lead Programmer. A special

thanks for his dedication to the Dyno2000

project. His programming skills, tenacious

troubleshooting and creative problem solv-

ing made the Dyno2000 possible.

Curtis Leaverton, Simulation Designer. My

friend and college, Curtis Leaverton is the

“brains” behind the Dyno2000. His engine

computer simulations have changed the

way performance enthusiasts approach

engine building.

Brent Erickson, Simulation Designer, Pro-

grammer. Developed new simulation mod-

els for the Dyno2000. A brilliant program-

mer, Brent’s positive “can-do” attitude is

backed up by his ability to accomplish what

many dismiss as impossible.

Trent Noller, Marketing/Sales Manager.

Trent excels at problem solving and there

MOTION SOFTWARE ACKNOWLEDGMENTS, ETC.

were more than a few problems that re-

quired his creative skills during the devel-

opment and deployment of the Dyno2000.

My friend for many years, Trent Noller can,

simply, be credited with the success of the

Dyno2000.

And special thanks are due to the market-

ing and management personnel of the Mr.

Gasket Performance Group™:

Gary Gibson, His dedication to the Desk-

Top software line is more than greatly ap-

preciated.

Bob Bruegging, President, CEO, Mr. Gas-

ket Performance Group. Bob’s experience

in performance marketing is vast. And so

is his enthusiasm!

And thanks to the many other individuals

at Mr. Gasket who have contributed to the

success of the DeskTop line, including:

Don McGee, Kirk Tinney, Mike Roth and

others too numerous to mention.