User Guide

Section 10: Kilo Stations
10-31
Link Contacts: Link contact IDs and Link participant IDs appear in the
Target Selection list when Show Link Data is ON.
Tube Selection Panel
From the Tube Selection Panel contacts are assigned to specific tubes and
weapon presets are entered. Torpedoes and UUVs can be wire guided from
tubes 5 and 6 only. Wire guide controls for these tubes are accessed from
the Tube Selection Panel by Clicking the W once the weapon is launched.
A number represents each of the Kilos six 53 cm torpedo tubes.
 Select a contact ID from the Target Selection List.
 Click the number of the desired tube to assign the weapon in that
tube to the selected target.
 Note: Certain weapons can only be used against submarines. You
are not able to assign a sub-only weapon to a target designated as a
surface contact. Until a contact is classified as surface or subsurface,
it cannot be assigned to any tube.
KILO FIRE CONTROL LAUNCH PANEL
From the Launch Panel weapons selected in the Target Display are
launched. Prior to launching a weapon the tube must be flooded, the
pressure equalized and the muzzle door opened. Once these steps have
been completed, the weapon can be fired. Once the launch procedure is
initiated for a tube, the name of the weapon in the window is greyed out and
the weapon cannot be changed until the launch procedure is halted and the
steps reversed.