Instruction Manual
Table Of Contents
- 1.IN THE BOX
- 2.IMPORTANT NOTE
- 3.INTRODUCTION
- 4.PARTS AND CONTROLS
- 5.INSTALLING THE BATTERIES AND SD CARD
- 6.USING THE CAMERA
- 7.THE OFF, ON, AND SURVEILLANCE MODES
- 8.ADVANCED SETTINGS
- 9.MOUNTING AND POSITIONING
- 10.REVIEW PHOTOS OR VIDEOS
- 11.TECHNICAL SPECIFICATIONS
- 12.TROUBLESHOOTING
- 13.WARRANTY
- 1.INHALT DER BOX
- 2.WICHTIGE ANMERKUNG
- 3.EINFÜHRUNG
- 4.KOMPONENTEN UND KONTROLLEN
- 5.BATTERIEN UND SD-KARTE EINLEGEN
- 6.VERWENDUNG DER KAMERA
- 7.ON-, OFF- UND ÜBERWACHUNGS-MODUS
- 8.ERWEITERTE EINSTELLUNGEN
- 9.MONTAGE UND POSITIONIERUNG
- 10.FOTOS ODER VIDEOS ANSEHEN
- 11.DIE TECHNISCHEN DATEN
- 12.FEHLERBESEITIGUNG
- 13.GARANTIE
13
pre-activated. While the animal enters the
detection area of the center motion sensor,
the camera will start taking photos or
videos. Select Off to save batteries power.
Motion
Test
This feature helps you aim the camera at
your target area. Please refer to the details
in Section 9.2.
Timelapse
Interval
1 hour,
optional
from 2s to
24h
Setting time lapse interval. It takes effect
ONLY when Mode is set as Time Lapse,
the camera will automatically take
photos/videos according to the set interval,
regardless of whether the PIR sensor has
detected any game. This is helpful when
observing cold-blooded animals like
snakes, or the process of flowering, etc.
Note: This option is invalid if Mode is set
as “Motion Detection”.
Date/Time
M/D/Y
hh:mm
AM/PM
M – Month, D – Day, Y – Year
hh – Hour, mm – Minute
Note: Use "LEFT/RIGHT" key to switch
parameters, use "UP/DOWN" to set
current date and time. Date input format
may change. Please refer to “Date
Format” parameter settings accordingly.
Date
Format
D/M/Y
M/D/Y
Y/M/D
Select date format which will be shown on
the screen and each capture.
Time
Format
12h
24h
Select time format which will be shown on
the screen and each capture.
12h - AM/PM
Camera
Name
On
Off
Select On to assign a 4-character long in
the form of Capital A-Z, 0-9 to record the