Instruction Manual
Table Of Contents
- 1.IN THE BOX
- 2.IMPORTANT NOTE
- 3.INTRODUCTION
- 4.PARTS AND CONTROLS
- 5.INSTALLING THE BATTERIES AND SD CARD
- 6.USING THE CAMERA
- 7.THE OFF, ON, AND SURVEILLANCE MODES
- 8.ADVANCED SETTINGS
- 9.MOUNTING AND POSITIONING
- 10.REVIEW PHOTOS OR VIDEOS
- 11.TECHNICAL SPECIFICATIONS
- 12.TROUBLESHOOTING
- 13.WARRANTY
- 1.INHALT DER BOX
- 2.WICHTIGE ANMERKUNG
- 3.EINFÜHRUNG
- 4.KOMPONENTEN UND KONTROLLEN
- 5.BATTERIEN UND SD-KARTE EINLEGEN
- 6.VERWENDUNG DER KAMERA
- 7.ON-, OFF- UND ÜBERWACHUNGS-MODUS
- 8.ERWEITERTE EINSTELLUNGEN
- 9.MONTAGE UND POSITIONIERUNG
- 10.FOTOS ODER VIDEOS ANSEHEN
- 11.DIE TECHNISCHEN DATEN
- 12.FEHLERBESEITIGUNG
- 13.GARANTIE
7
In the ON mode when battery power level gets low, the
message "Low Battery" will show on the screen, please
replace the batteries. If the battery indicator shows in RED,
this does mean the batteries are not able to drive IR LEDs
flash at night, however the batteries still work at daytime until
"Low Battery". If you want to continue night vision, please
replace the batteries.
Figure 6: Loading the Batteries
5.2. INSERTING THE SD CARD
Insert the SD card (with the camera powered off), before
beginning to operate the camera. Don't insert or remove the
SD card when the camera is powered on or in the surveillance
mode. (Figure 7).
Figure 7: Inserting the SD Card
+
一