SDS

Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C (518101))
Safety Data Sheet
Report No.: STRD1601241S
Page 5 of 9
from entering sewers or waterways.
Methods and materials for Containment
Stop the leak if safe to do so. Contain the spilled
liquid with dry sand or earth. Clean up spills
immediately.
Methods and materials for cleaning up
Absorb spilled material with an inert absorbent
(dry sand or earth). Scoop contaminated
absorbent into an acceptable waste container.
Collect all contaminated absorbent and dispose
of according to directions in Section 13. Scrub
the area with detergent and water; collect all
contaminated wash water for proper disposal.
Section 7 – Handling and Storage
Handling
Do not dismantle, open or shred secondary NI-
MH BATTERY;
Don’t handling NI-MH BATTERY with metalwork.
Do not open, dissemble, crush or burn battery.
Ensure good ventilation/ exhaustion at the
workplace.
Prevent formation of dust.
Information about protection against explosions
and fires: Keep ignition sources away- Do not
smoke.
Storage
If the NI-MH BATTERY is subject to storage for
such a long term as more than 3 months, it is
recommended to recharge the NI-MH BATTERY
periodically.
3 months: -10℃~+40℃, 45 to 85%RH
And recommended at 0℃~+35℃ for long period
storage.
The capacity recovery rate in the delivery state
(50% capacity of fully charged) after storage is
assumed to be 80% or more.
The voltage for a long time storage shall be
1.2V~2.2V range.
Do not storage NI-MH BATTERY haphazardly in
a box or drawer where they may short-circuit
each other or be short-circuited by other metal
objects.
Keep out of reach of children.
Do not expose NI-MH BATTERY to heat or fire.
Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic
materials.