Specifications

Installing Upper Tray Assembly - 7160-0336 (cont'd)
FIG. 16
FIG. 15
Ratchet Wrench
7/16" Socket
7/16" Wrench
Knife
Drill
9/32" Drill Bit
6 of 9
FIG. 14
FIG. 17
FIG. 18
Attach RH & LH Slide Stop Brackets to the metal backseat support framework
with (2) 1/4-20 screws & nuts (see FIG 16 & 18).
Trim the carpeting if nescessary to access the area (see FIG 17).
Used the existing hole in the framework to mount the upper hole, drill a 9/32" hole
through the framework to mount the lower hole.
Slide the tray forward and back verifying it moves freely and that the slides
lock in the closed position.
Re-install the vehicles back seat.