Instructions / Assembly

2. Installation
A. Use the solar module to mark and drill the 3 mounting holes plus 1 hole for the
electric cord (as shown in figure 2).
Use 1/4" holes for the cord and:
1/16" holes for the mounting holes on wooden sheds
3/8" holes for the mounting holes on metal sheds
3/8" holes for the mounting holes on resin sheds.
B. Slide the cord through the cord hole.
Mount the solar module using 3 screws* to fasten the solar module to the
exterior wall (as shown in figure 3).
Figure 2 Figure 3
* Included in the kit
3. Solar Panel Adjustment
Position the solar panel facing the south*. For your
convenience use the compass located on top.
Adjust the solar panel to 45° to collect maximum solar
energy.
The solar module can swivel 360° and 180° for
optimum adjustment (as shown in figure 4).
* Countries on the southern part of the planet should
face the solar panel to the North.
4. Light Installation
A. Slide out the wall bracket from the light,
and hold it in your hand.
B. Select the desired location for the
lamp inside the shed (wall or ceiling).
Ensure the solar module cord reaches
this location.
B. Use an electric drill to make two holes in the wall,
and secure the wall bracket with provided screws.
C. Slide the Light into the installed wall bracket
(figure 5).
Figure 4
Figure 5