BAYTOWN II SOLAR LAMP POST WITH GS LED SOLAR BULB US Patent # 7172307 US Patent # 9458970 Patent Pending DIY Installation For Solar Lamp Post Instruction Manual Model: GS-105B-SG Visit our website or download the latest version of your instruction manual: www.gamasonic.com or www.gamasonic.
Introduction Thank you for your purchase. GAMA SONIC® solar charged accent lighting eliminates the problems associated with most solar lighting available today. GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years.
Assembly Instructions: 1. Attach the body (B) to the stem(D) with the four supplied screws, as shown. 2. Place the lens and cone (C) into the body (B). B C D B D D 3. Turn on switch to desired setting. A A D 4. Attach top (A) to the body (B) with the two supplied screw caps. A B A 5. Attach Side handles provided. 6. Screw on top Ornament.
7. Assemble pole by screwing the four pieces together. Flat installation on flat surface (Without the Anchor): 8.1 Mark three holes with the base plate as a template. Use electric drill to make the holes. Assemble using provided hardware. 8.2 Attach the three decorative caps provided. Continue by screwing the fixture to the base.
EZ Anchor Installation Instructions: 9.1 Attach Part (E) to Part (F) Using the four small screws from, as shown. 9.2 Insert the Turning bar (G) in the hole through the anchor stake (H) as shown. 9.3 Place anchor in desired location and apply downward pressure while turning the Turning bar clock wise. 9.4 Occasionally check the anchor Level Tool to ensure your digging is straight. I G 9.5 Stop turning once Part (I) is flat with ground H level. 9.6 Remove the Turning Bar (G). 9.
Replacing the Batteries (After several years of use, the battery may need replacing). 1. Unscrew the two screw caps and detach the top (A). Make sure the ON/OFF switch is in the OFF (O) position. 2. Unscrew the battery compartment (Fig. 1) screw located on the silver reflector and remove the compartment door. 3. Unclip the connector and remove the old battery. Make sure the new battery is a Gama Sonic - 3.2V/1,500mAh, Li-ion Rechargeable battery with connector. 4.
