Instructions / Assembly

Assembly Instructions (solar panel and light separated)
In case you need to install the solar panel remotely to expose it better to the sun,
follow below instruction.
1. Before installing the solar panel in a remote location,
unpack the extension electric wire under the solar panel
to the desire length.
2. Assembly the solar panel (B) into the mounting
pole (D) using the screw provided as shown in
Figure 3.
3. Assemble the Stack (D) or the Base bracket (C)
into the body unit (A) using the screw (S1) and nut
provided
as shown in Figure 1 (Stack) or Figure 2 (Base).
4. Assemble the solar panel (B) into the body unit (A)
using
the screw (S1) and nut provided (as shown in Figure 1).
5. Carefully insert the unit into the ground where desired
Note: 45 degree toward the south is the recommended angle and direction
in North America to absorb maximum sun energy during the day.
FIGURE 3
FIGURE 4
FIGURE 5