Full Product Manual

3. Assembly Instructions 4. Operation Instructions
5. Replacement Parts
page 3
Number installation.
• Using a flat head screwdriver, push into the flat openings at
the bottom of the address sign (A). This will cause the frame
to open and it can be removed.
• Choose the desired number/letter combination needed and
peel off the clear protective film covering each piece (use
blank pieces if your address is less than 5 digits).
• Place each piece in the sign.
NOTE: make sure the two tabs are facing up and the relief cut
is facing down.
• Replace the frame by inserting the top part first and then
pushing down on the bottom to lock the tabs in place.
Wall Mount
• Find the desired mounting location that will get the most
amount of direct sunlight.
• Using the address sign (A) as a template, mark the two holes
located on the sides of the sign.
• Using a drill, drill two holes no larger than the size of the
anchors and insert the anchors in the holes.
• Turn the lamp on by selecting the desired LED color using the
switch on the back.
• Align the address sign (A) with the anchors and secure using
the provided screws.
• Place the caps (B) over the opening to the screws.
Stake Mount
• Assemble the poles (D) to the stakes (E) by pushing them
together.
NOTE: When assembling the two pole sections, you have the
option to use one or two poles (D) to achieve the desired
height of the sign.
• Insert the adapter (C) to the top of the poles (D) and attach
them to the address sign (A) by pushing together.
• Place the caps (B) over the opening to the two screw holes
on the sides of the sign.
• Push the stakes (E) into the ground in the desired location
that will receive the most amount of direct sunlight.
• Turn the lamp on by selecting the desired LED color using the
switch on the back.
• Turn the address sign ON by moving the switch to the desired
LED color setting.
- Bright White = 6000k cool white color
- Warm White = 3100k warm white color
• Your address sign will turn on automatically at dusk.
Replacement batteries can be purchased at any store that sells
AA Rechargeable batteries.
Your Lamp uses the following battery:
AA Rechargeable Battery 1.2V/1000mAh