Instruction Manual VICTORIAN BULB SOLAR LAMP POST Part # 94B001, 94B002, 94B003 US patents # 7172307, 9458970
Please read the instruction manual carefully to obtain the best results from your purchase. Thank you for your purchase! GAMA SONIC® solar charged lights are brighter and last all night with a typical solar charge. Unique design, superior light output and numerous installation options confirm the outstanding value of our product. GAMA SONIC® has been recognized as a worldwide leader in the lighting industry for over 20 years.
Assembly Instructions Operation Instructions 94B001 1. 1. Using the provided template, mark and drill three holes into concrete no larger than the provided anchors (G). 2. NOTE: For installation in the ground where pouring concrete is not preferred or possible, use our EZ Lamp Post Anchor, model 30001 (sold separately) to quickly and easily secure the lamp anywhere in your yard. This is only to be used with model 94B001. 2. Place the anchors (G) into the holes with the threaded ends facing up. 3.
Replacing the battery After several years of use, the battery may need replacing. 1. Make sure the lamp is in the OFF position. 2. Remove the top (A) from the fixture by removing the two screw caps. 3. Remove the GS Solar LED Bulb. 4. Remove the screw from the battery compartment cover on the silver reflector on the underside of the top (A). 5. Remove the battery and unclip the connector. 6. Make sure the new battery is a Gama Sonic – 3.
