Instruction Manual
EN - 26
III. INSTRUCTION FOR USE
Remove all packaging material, remove the appliance. Remove all adhesive foils, stickers
or paper from the appliance..
CONTROL:
Button ON/OFF „
“ (B2)
Pressing and holding this button (about 3 seconds) will put the appliance into operation
(you will hear a sound signal 3x beeps). Having finished using the appliance by pressing
and holding the button (about 3 seconds), turn it off, and unplug the appliance from the
outlet by pulling out the fork of the supply cord from the socket.
Note:
After turning on the appliance, “3” will appear on display B1.
„
“ button TEMP to set temperature (B3)
– set the temperature (1, 2, 3, 4, 5, 6) by button B3,
– the temperature interval is 30 - 45 °C.
Use:
• Cover yourself with the pad or apply the unit to the part of your body you want to warm
through. Make sure the pad is not creased or folded.
• Connect the appliance to mains. Place the controller so that it could be easily accessible
• Switch on the appliance by pressing and holding button B2.
• Set the operation temperature by B controller. The temperature is shown on B1 display.
We recommend beginning with a lower level of power and then increasing it as needed.
• After 90 minutes the heating pad switches off automatically.
• The pad may be switched off at any time by pressing and holding B2 button (about 3
secons).
• When the electric pad is on, the control must not be covered. Make sure not to put the
control under the quilt or the pillow, or other objects, let alone close to other heating
sources - the control could be overheated and damaged.
Note:
• You use the pad as a bottom layer, put it on bed and cover it with a sheet or a quilt.
• Use level 1 for long-term operation. Higher levels of power are designed for short-term
operation or to reach the required temperature faster.
• In case of accident or damage (fire, burning by a cigarette, unusual sounds or smells)
disconnect the blanket from the power supply immediately.
IV. MAINTENANCE
Disconnect the controller B from the heating pad A. Wipe the controller B with a damp
cloth. The heating pad A may be machine washed. However we recommend hand-
washing to prolong the appliance service life. Never use any aggressive cleaning agents
and industrial solvents for cleaning. After washing, hang the pad over clothesline (do not
use pins a dryer or a hair dryer. Do not try to speed up the drying by switching the blanket
on!) and let it completely dry. Once cold, store the pad at a safe place, out of the reach of
children and incapacitated persons.