Instruction Manual

EN - 23
EN
• The power cord must not be damaged with sharp or hot objects, open fire, it must not be
sunk into water or bent over sharp edges.
• In order to ensure safety and proper function of the appliance, use only original spare
parts and accessories approved by the manufacturer.
• Use this appliance only for the purpose for which it was designed as specified in this
user‘s manual. Never use the appliance for any other purpose.
• The producer does not guarantee any loss caused by improper handling of the appliance
and its accessories (e. g. electrical accident, fire) and its guarantee for the appliance
does not apply in the case of non–compliance with the safety instructions above.
II. CONTROLS DESCRIPTION
A - heating waist belt
A
A1
B
B1
B2
B3
B4
A1 - connection socket
B - controller
B1 - display
B2 - switch ON/OFF
B3 - „
“ button to set temperature
B4 - supply cable
III. INSTRUCTION FOR USE
Remove all packaging material, remove the appliance. Remove all adhesive foils, stickers
or paper from the appliance..
CONTROL:
Switch ON/OFF (B2)
– Press long (approx. 3 seconds) to switch on the appliance (acoustic signal will
be issued);
– Press long (approx. 3 seconds) again to switch off the appliance.
Note:
After turning on the appliance, “3” will appear on display B1.
„
“ button to set temperature (B3)
– set the temperature (1, 2, 3, 4, 5, 6) by button B3
– the temperature interval is 30 - 45 °C