Instruction manual

III. VACUUM CLEANER PREPARATION

Remove all packing material, take out the vacuum cleaner and the accessories.

Assembling the charging stand:

Assemble the charging support piece to the charging support base. (Fig. 2)

The charging base could be fixed to the wall using two screws.

Fixing vacuum cleaner into adapter

Put vacuum cleaner A to cleaner body B with the suction vent and then tilt the vacuum

cleaner to the aperture to the maximum position (you will hear a snapping sound). After

taking the vacuum cleaner from the body you have to push lock button A3 and then to pull

the vacuum cleaner out (Fig. 3).

Floor nozzle with rotation brush

Slide the nozzle D into the vacuum cleaner body B all the way (you’ll hear an audible

clack). Make sure that both the switches A1 and B1 are off before any manipulation with

the rotation brush.

Assembling handle

Connect the handle into the cleaner body,insert and tighten the screw.

Slit nozzles, brush

Slide the selected accessory E all the way into the opening in the dust bin A5. Take the

attachment off reversely. The accessory can be used only with this vacuum cleaner.

Battery charging

Before the first use, the battery has to be charged for at least 14 hours. Plug battery

charger F to the electric socket. Push the adapter connector into the slot C2 in the charging

stand. The operation of charging of the accumulator is indicated by the “red” indicator D1.

The indicator light red continuously when the battery is fully charged. After about 10 to 12

hours, the battery is usually fully charged and it enables operation for about 20 minutes

(depends on method of vacuuming).

CAUTION

– If you charge the battery for the first time or after long storage, about 60 % of its total

capacity is charged. After repeated discharge and repeated recharge the battery is

fully charged.

– After completing hard work or in hot environment, the battery may be too hot for

charging. Let the battery cool down before charging.

– Do not use the vacuum cleaner during charging.

– For ensuring longer life of the battery we recommend full discharge and then full

recharge of the battery four times a year.

– Turn both the switches A1 and B1 to OFF!

– The vacuum cleaner can be charged only in one piece with the floor nozzle D placed in

the stand.

/ 43