User's Manual

5
Overview
The Gallagher SmartReader HR3 is a Bluetooth enabled hand held Electronic ID reader
which allows the user to read and store ISO animal Electronic ID tags. The Gallagher
SmartReader HR3 contains internal memory and internal rechargeable batteries.
The Gallagher SmartReader HR
3 has two modes of operation:
Memory Mode• - The captured Electronic ID tag data is stored in the SmartReader in
sessions until it is transferred to computer using the MyScale Pro software, and is
also immediately sent out the Serial port (via cable) to a Scale or data logging
device.
Non-Memory Mode• - The captured Electronic ID tag data is immediately sent out the
Serial port (via Bluetooth or cable) to a Scale or data logging device.
Tag types read
The Gallagher SmartReader HR3 enables you to read both HDX (Half Duplex) and FDX-B
(Full Duplex-B) Electronic ID tags.
Care and Maintenance
The SmartReader HR3 is a tough and reliable product designed for use in typical livestock
environments. However, proper care and maintenance can extend the SmartReader’s
life.
Listed below are guidelines for keeping the SmartReader in good condition.
For optimal battery life, Gallagher recommends that you store the SmartReader in a •
cool, dry area (15 to 25 ° Celsius) out of direct sunlight.
After use, clean the SmartReader with a damp cloth. Take care not to scratch the •
display.
5