User's Manual

Gallagher SmartReader R Series User Manual

Procedure

1. Measure the vertical range of the Electronic ID tags on the animals to be

scanned.

2. Determine the average height of the Electronic ID and mark this on the

outside of the animal handler.

3. Determine what the Antenna Panel is to be mounted on, wood or pipe

work, and prepare the appropriate mounting hardware from the

supplied kit.

Wood - washers and tek screws Pipe work - washers, bolts and nuts

4. Using the defined mounting holes, mount the Antenna Panel on the

outside of the animal handler so that the middle of the Antenna Panel

matches the average height.