User's Manual

Gallagher SmartReader R Series User Manual
3
USER INFORMATION
SmartReader user interface
Button
Button Function
Volume
There are two volume levels on the SmartReader ON
and OFF.
To change the volume on the SmartReader while it is
operating, press the Volume button.
Note: Warning beeps (low battery warning etc) ignore
the Volume setting and beep as required.
Audible beep
The SmartReader beeps whenever one of the following situations occurs:
• An Electronic ID tag has been read, except if the volume is set to OFF.
• The volume level is set.
• The battery charge level is low. This warning sounds regardless of the
volume set.
• The external power supply level is too low or too high. This warning
sounds regardless of the volume level setting.