User's Manual

User Manual Gallagher SmartReader R Series
2
Electronic ID tags
The Gallagher SmartReader enables you to read both HDX (Half Duplex) and
FDX-B (Full Duplex-B) Electronic ID tags.
HDX and FDX-B Electronic ID tags operate differently and therefore have
different applications.
Configurator
The Configurator is a software program provided with the SmartReader R
Series. Use it to alter settings and to diagnose performance problems in the
installed SmartReader.
The Configurator is for advanced users and should be used with care as
altering settings affects the operation of the SmartReader.
The Configurator software is automatically installed with the MyScale Pro
software.
MyScale Pro
Note: The MyScale Pro CD is included with this product to so that the
Configurator software (Included on the CD) can be installed as required, refer
to Installing the Configurator in the on-line SmartReader R / BR Series
Configurator User Guide.
For the SmartReader R Series, MyScale Pro is not used. MyScale Pro does
not communicate directly with the R Series SmartReader. The Electronic ID
tag information is transferred to a Scale or computer etc.
If the R Series SmartReader is connected to a Gallagher Scale, the captured
Electronic ID tag information is incorporated into Scale sessions and can be
transferred to MyScale Pro from the Scale.
For information on the MyScale Pro features see the documentation provided
with the Scale. For an updated version of the MyScale Pro manual go to the
following website:
www.gallagherams.com