User's Manual

Gallagher SmartReader R Series User Manual
17
4. Click .
The SmartReader current settings are transferred to the Configurator and
displayed.
5. Set the Synchronisation - Wireless option to On.
6. Click to copy the changes down to the SmartReader.
7. Repeat for the second SmartReader.
Wired installation
• Applicable if you are installing more than two SmartReaders.
• Applicable for two SmartReader installations where greater reliability is
required and it is practical to run the required cables.
Once you have installed the SmartReaders, you need to change the following
settings in the SmartReader via the Configurator program on your computer.
Procedure
1. Connect the SmartReader to a computer. See Connect the SmartReader
to a computer
(p 10).
2. Open the Configurator software.