User's Manual

Gallagher SmartReader BR Series User Manual
37
Starting MyScale Pro
Connecting the SmartReader to the computer by cable
To connect the SmartReader to a computer by cable, complete the following
steps:
1. Plug the supplied reader to RS-232 cable into the SmartReader.
2. Plug the other end into the serial port on your computer.
Notes:
- If your computer does not have a serial port, use the supplied RS-232
to USB adaptor to connect to a USB port on the computer.
- Connection via Bluetooth does not work for MyScale Pro.
To Start MyScale Pro:
Double-click the MyScale Pro icon on the desktop.
Alternatively...
You can start MyScale Pro from the Windows Start menu.
1. Click on the Windows Start button.
2. Select All Programs (Windows XP) or Programs (Windows 2000).
3. Select MyScale.
4. Click on .
Closing MyScale Pro
To close MyScale Pro:
Click on the button or on the at the top right of the window.
Note: It is recommended that you close MyScale Pro when it is not in use,
this will enable the serial port to be available to other programs.