User's Manual

User Manual Gallagher SmartReader BR Series
12
INSTALLATION
Connecting the SmartReader batteries
During factory assembly, two batteries are installed in the SmartReader.
These batteries are not connected to the SmartReader to preserve the battery
prior to first use.
Once you are ready to use the SmartReader for the first time, it is necessary
to connect the batteries. You do not need to disconnect the batteries again.
1. On a soft cloth, lay the SmartReader on its front.
2. Using a posi-drive screw driver, remove the screws holding the lower
back panel of the SmartReader.
3. Remove the lower back panel.
4. Remove the foam spacer between the batteries and retain.
5. Stand each battery up.
6. Connect the battery leads. Connect the longer leads to the left-hand
battery.
- Connect the Red lead to the red terminal.
- Connect the Black lead to the black terminal.
7. Lay down the batteries with the:
- Terminals to the top of the box and,